Rice Lake Ishida iPC-WP Portable Bench Scales - Manual (Page 31)

28/32 IPC-WP Series Service Manual
4.1.4 Customer Display Board (PS-023) Replacement
1. Disconnect the harness from the connector.
2. Remove the screw (ST8x8).
Perform this procedure in reverse for re-assembly.
4.1.5 Load Cell Replacement
1. Disconnect the cell cord wires and the
grounding wires by using a soldering iron in
the same manner as for Switch Board
Replacement (PS-022).
2. Remove the 2 screws (M6x25) on the Plate
support by using a hexagonal wrench.
Cell cord
Plate support
M6×25
Grounding cord
Plate support
M6×25
Base
Harness
ST8Ч8