Rice Lake OB-350 Loadrunner Series Onboard Weight Indicator - Manual (Page 15)

Operator Configuration and Diagnostics 11
5.2 Operator Settings
5.2.1 Display Menu
To change the display contrast
1. In MENU, select Display.
2. Press (OK).
3. Select OLED .
4. Press (OK).
5. Press toggle between:
High
Medium
Low .
6. Press to confirm setting.
To display version and serial number
1. In MENU, select Display.
2. Press (OK) .
3. Select Info .
4. Press (OK)
5. Firmware version and serial number displays.
6. Press twice to return to MENU
5.2.2 Diagnostics Menu
To Display Load Cell Diagnostics
lb
1. In MENU, select Diagnostics.
2. Press (OK).
3. Select Cells.
4. Press (OK).
5. Channel 1 & 2 weight and input mill-Volt readings are displayed. Channel
1 only is the most common setup.
6. Press twice to return to MENU.
Milli-Volt readings will differ according to the combined tare (empty)
weight and any payload in the body. Load cells should only be checked
when the vehicle is unloaded. Max input reading is 39.625 milli-Volt, this
is approx 10 times more than would be expected.
Note
To Display CAN Diagnostics
Not currently available.