Rice Lake Datamax M-Class Mark II - Manual (Page 16)

10 Chapter 2 - Printer Setup
5. Route the ribbon up and then around to the Ribbon Take-Up Hub, winding it several times in a
clockwise direction to secure it in place.
n Ribbon Take-up Hub
6. Close the cover and press the Feed button several times to position the ribbon and ensure proper
tracking.
7. The ‘Media Type’ setting within the printer’s setup must be set to ‘Thermal Transfer’ to print using
a ribbon. This can be accomplished with the DMXConfig Utility, (see section 3.4) or on printers
equipped with a display - through the printers menu system, (see section 4.5).