Rice Lake Datamax M-Class - Manual (Page 126)

118 M-Class
8. Use
the FWD and REV buttons to increment/decremnt the
flashing value. Press the button to move to the next
field. Once all fields are correct press the button once.
The value will automatically be saved.
You can then use the FWD to scroll to the ‘SUBNET MASK
and ‘GATEWAY’ menu items and set those values in the same
manner as the ‘IP ADDRESS’ was set.
JQ!BEESFTT!
+2:3/111/111/2:3!
TVCOFU!NBTL!
+111/111/111/111!
HBUFXBZ!
+111/111/111/111!
Note: When the menu item ‘IP DISCOVERY’ is set to enabled you will not be able to change the values for the “IP
ADDRESS’, ‘SUBNET MASK’, or ‘GATEWAY’ menu items. The values displayed are for reference only and
will become active once ‘IP DISCOVERY’ set to disabled.
9. Once you have the proper addresses set, press the
button
repeatily until you have exited the printer’s menu. Turn OFF the
printer and then back ON.
XFE!21;27B!13KVM3114!
SFBEZ!
Once you have entered your IP settings into the printer you can then install the port and printer driver using the Windows®
‘Add a Printer Wizard’. See section, Installing the Printer Driver and Port in this document.