User prompts and condition messages (continued), Displayed message description condition(s), Ready mode – Rice Lake Datamax M-Class User Manual
Page 70: A label is awaiting removal, Normal power-up and soft reset condition, The media calibration is not set, The print job is being processed
62
M-Class
User Prompts and Condition Messages (continued)
Displayed Message
Description
Condition(s)
!
!
SFBEZ
!
!
Ready Mode.
Normal operating mode. The printer is ready to receive
and process label formats.
!
!
SFNPWF!MBCFM!
!
A label is awaiting removal.
The Present Sensor option is enabled and a label blocks
the sensor. Remove the label to continue printing.
!
TZTUFN!
JOJUJBMJ[JOH!
!
Normal power-up and soft reset
condition.
Follows the ‘SYSTEM RESET IN PROGRESS’
message after a reset or power-up.
!
TZTUFN!SFTFU!!
JO!QSPHSFTT!
!
Normal power-up and soft reset
condition.
Occurs when the user resets the printer via the host or
Front Panel.
!
!
VODBMJCSBUFE!
!
The media calibration is not set.
Perform calibration; see Section 5.4.
!
YYYY!PG!YYYY!
QSJOUJOH!
!
The print job is being processed.
Batch status indication, updated with each label printed.