Rice Lake Datamax M-Class - Manual (Page 59)

M-Class 51
System Settings (continued)
SET FACTORY DEFAULTS Parameters in this menu listing with the ‘ ’ symbol are the designated defaults.
SET FACTORY DEFAULTS Overwrite the current settings with the factory default settings or, if selected, will
restore the Factory Setting File.
Note: The reset will be automatic. If no Factory Setting File is used, all menu settings will be restored
except CUSTOM ADJUSTMENTS, and the media and ribbon sensor calibrations.
FORMAT ATTRIBUTES Affects the manner in which overlapping text and graphics are treated as the label is
printed. Consult the Class Series Programmer’s Manual for details.
XOR Intersecting text strings, images, and bar codes print on top of one another.
OPAQUE Interacting text strings, images, and bar codes are obliterated by those formatted
last. Each character cell is treated as opaque.
TRANSPARENT Intersecting text strings, images, and bar codes will not be printed. (An odd number
of overlapping objects will print.)
LABEL ROTATION
♦
Instructs the printer to rotate the label format 180 degrees before printing.
ENABLED Label formats are flipped top to bottom.
DISABLED Label formats are printed normally.
IMAGING MODE ♦
Instructs the printer whether to pre-image the label format.
Note: This selection can affect the accuracy of time-stamped labels and label throughput.
MULTIPLE LABEL The printer images multiple labels as memory permits, achieving the fastest
throughput; however, if time-stamping, the time will reflect the moment the label is
imaged rather than when actually printed.
SINGLE LABEL The printer images the next label only after the previous label has been successfully
printed. Single processing provides time-stamps that are more accurate, but it slows
label throughput time.
PAUSE MODE When enabled, suspends printing between each label until the PAUSE Key is
pressed.
ENABLED Requires an operator press the PAUSE Key after each label.
DISABLED The printer completes label batch without pausing between labels.