Rice Lake SURVIVOR LaserLight Series Stop/Go Remote Displays - Installation & Operation Manual - Manual (Page 16)

12 LaserLight Installation and Operation Manual
Table 3-1 summarizes the functions of each of the main menus and Figure illustrates the main menu selections.
When configuring the indicator attached to the remote display, ensure that the decimal point configuration is
compatible with the remote display. The LaserLight 7-segment remote display allows none, one, or two decimal
places (see Figure 3-2 for jumper positions). The 8- or 12-character matrix displays use of one character position
for the decimal point.
Figure 3-5. Configuration Main Menu Choices
With the 8 and 12-character matrix displays some of the labels are not shortened, for example STDSTL in the
7-segment is STAND STILL on the 12-character display.
7-segment
Display Menu
8-Character
Matrix Display
Menu
12-Character
Matrix Display
Menu Menu Function
CONFIG CONFIG CONFIG Configuration. Configures time and date (option), temperature (option),
display brightness, mirroring, and other parameters associated with
configuring the remote display
SERIAL SERIAL SERIAL Serial. Configures serial ports
TEST TEST TEST Test. System hardware tests
VER VERSION VERSION Version. Displays installed software version number
Table 3-1. LaserLight Remote Display Menu Summary
TIM DAT TEMP BRIGHT
ENABLE
Off
On
ISO
USA
Minutes
Hour
FORMAT SET DATE
Month
Day
Year
SUPP 0 MIRROR STDSTL ADDRES MSG TM D TEST RESET
On
Off
C
F
DAY
On
Off
Off
On
Off
On 0 - 31
Off
On
CONFIG SERIAL TEST VER
15 sec
5 sec
30 sec
1 min
5 min
Reset
1
2
3
4
5
6
7
8
9
10
LEARN EN
Off
On NIGHT
TEMP ADJ
+/- 5
1
2
3
4
5
6
7
8
9
10
Note