Rice Lake SURVIVOR LaserLight Series Stop/Go Remote Displays - Installation & Operation Manual - Manual (Page 5)

Introduction 1
About This Manual
This manual is intended for use by service technicians responsible for installing and servicing the LaserLight ® LED
remote display.
Installation procedures are presented in the order likely to be followed by the installer: pre-installation setup,
configuration, and on-site installation.
This manual can be viewed and downloaded from the Rice Lake Weighing Systems web site at
www.ricelake.com .
1.0 Introduction
The LaserLight remote display features a super-bright LED display and non-glare filtered lens for use in a wide
variety of applications. The LaserLight Series are available with a 7-segment, six-digit display or an 8 or 12
character matrix display. The LaserLight remote display is designed to work with most digital weight indicators,
host computers, and peripherals using 20 mA current loop, RS-232, or RS-485 communications.
The unique IntelliBright ™ feature uses a photo sensor to read ambient light and automatically adjusts the
LaserLight display between day and night settings.
The display has seven internal buttons and three external buttons to set various parameters. The external buttons
include two for setting the time and date, and one for the learn sequence. The configuration menu is entered via the
setup button and is displayed on the display board panel for easy configuration of the unit.
This manual provides installation and configuration instructions for the display.
Standard Features
The LaserLight 7-segment remote display is available in 4" or 6" digit sizes and the matrix display is available in
2.5" character size with 8 or 12 positions. The LaserLight 4-SG remote display comes in a 4" digit size in a 6"
enclosure size. Both styles use an Auto-Learn function that automatically determines the serial settings and data
format used by the attached indicator.
Additional standard features include:
•Hold displayed weight (demand input)
•Adjustable daylight/night intensity
•Mirror function (weight only)
•Auto-sensing 115/230 VAC power supply
•Mode and unit legends
•Echo
•Traffic light option (4" digit size only)
•Time and date (4", 4"-SG, 6" only)
Optional Features
Optional features of the LaserLight remote display include:
•Temperature
•Field-installable metal visor for all models
•UL Approved Unit
•Time and date (M-Series, 8 and 12 character)