Rice Lake TransAct 1.0 - Manual (Page 136)

132 Appendix
[Category 2]
Title=Refuse
SubCat1=(0,In Landfill)(1,Out Landfill)(2,None)
SubCat1Title=Location
SubCat2=
SubCat2Title=
Save the file and Exit Notepad. If you did not quit TransAct before
making changes to the .ini file, do so now. The changes made to the
.ini file will take effect when you reopen TransAct. When you return to
TransAct and select Admin | Categories | Refuse your new Location
subcategory heading appears as a drop-down list so you can select the
location where your refuse goes.
[Indicator Types] Editing
TransAct has provided several scale indicator types with the program.
The [Indicator Types] section is a listing of the indicator name and a
series of codes that define the indicators serial data stream to TransAct.
DO NOT change the data in these fields. If your indicator is not listed,
please call your dealer or the TransAct customer support line for
assistance setting up your indicator.
[Scale Settings] Editing
We do not recommend using the [Scale Settings] section to change
your scale port settings. All of the items can be changed and tested
while running the TransAct program. Select Admin | Preferences |
Scale Port and select the scale indicator type, connection, baud rate,
flow, parity, and stop bits. Press the Test button at the bottom of the
window to view the data the computer is receiving from the scale
indicator.
[Printer Settings] Editing
We do not recommend using the [Printer Settings] section to change
your printer port setup. All of the items can be changed and tested
while running the TransAct program. Select Admin | Preferences |
Printer Port and select the printer type, connection, baud rate, flow,
parity, and stop bits. Press the Test button at the bottom of the window,
to send up to four lines of text to the printer.