Rice Lake TransAct 1.0 - Manual (Page 24)

2 0 Installation
When prompted, insert the remaining TransAct for Windows disk.
Disk 2 Prompt
Click OK to continue with the installation.
The AUTOEXEC.BAT configuration file must include the command
SHARE /F:5100 /L:500 for TransAct to run. If this command needs to
be added, the following message appears.
Update AATOEXEC.BAT File
Click Yes to make the necessary changes and continue.
The following message appears when installation is complete.
Installation Complete
Click OK to continue.
A final dialog box will ask if you want to reboot the system.