Canon FAX-L800 - Manual (Page 126)

Canon FAX-L800 User’s Guide ENGLISH
6-24 Chapter 6 Sending Documents
Sending a Document with a Subaddress/
Password
You can send documents with ITU-T standard subaddresses and passwords. In
order for a transaction to succeed, the subaddresses and passwords on the
sending and receiving fax units must match. You can use two methods to send a
document with an ITU-T subaddress and password:
½ Press a One-touch or Coded Speed Dialling button registered for subaddress/
password sending.
½ Enter the subaddress and password with the SUBADDRESS and
PASSWORD buttons on the operation panel when you send the document.
Subaddress/Password Sending with Speed Dialling
If you register the subaddress and/or password for a One-touch or Coded Speed
Dialling button, the subaddress/password are entered for you automatically after
you press the speed dialling buttons. (
Q4-6, 4-15)
1. To use subaddress/password sending with a speed dialling button, you must
first register the subaddress/password for the telephone number when you
register the number for One-touch or Coded Speed Dialling. (
Q4-6, 4-14)
2. Set the document on the fax. (
Q6-3)
Set the document resolution, contrast, and document type. ( Q6-4)
You can also select a sender’s name with the TTI SELECTOR. (
Q6-6)
01
72
3. Press the One-touch Speed Dialling button registered for subaddress/
password sending. ( Q4-26)
-or-
0 0 0
1 2 7
Press the CODED DIAL button followed by the three-digit code for the
Coded Speed Dialling number registered for subaddress/password sending.
(
Q4-28)