Canon FAX-L800 - Manual (Page 215)

Canon FAX-L800 User’s Guide ENGLISH
11-17 Chapter 11 Setting Up and Using Polling
9. Set the polling box to erase or keep the document after polling.
SET Press SET.
<
< Press the search buttons to display the setting you want.
ERASE AFTER TX
ON
ERASE AFTER TX
OFF
ON The document in the memory box is erased after it is sent once in
response to polling by another fax.
OFF The document in the memory box is not erased after it is polled.
Select this setting if you expect the document will be polled by more
than one fax.
SET With the selection you want displayed, press SET.
10. You can repeat this procedure to set up another polling box.
-or-
Press STOP to return to standby.
Scanning a Document into the Memory for Polling Sending
Follow this procedure to scan a document into the polling box. The document
will remain in the polling box to be polled by other fax units.
1. Set the document on the fax. (
Q6-3)
Set the document resolution, contrast, and document type. ( Q6-4)
You can select a sender’s name with the TTI SELECTOR. (
Q6-6)
POLLING
2. Open both One-touch Speed Dialling panels. Then press POLLING.
POLLING
1.POLLING TX