Tx (send) settings – Canon FAX-L800 User Manual
Page 317
Canon
FAX-L800 User’s Guide
ENGLISH
16-9
Chapter 16
Summary of Important Settings
TX (Send) Settings
DATA REGISTRATION
1. Open both One-touch Speed Dialling panels. Then press DATA
REGISTRATION.
REGISTRATION
1.DATA REGISTRATION
SET
2. Press SET.
DATA REGISTRATION
1.USER SETTINGS
<
<
3. Press the search buttons to display TX SETTINGS.
DATA REGISTRATION
3.TX SETTINGS
SET
4. Press SET.
TX SETTINGS
1.ECM TX
<
<
5. Use the search buttons to display the item you want to set or change.
*
Default settings are in bold.
1.ECM TX
Turn ECM (error correction mode) transmission off and on. This
switch does not affect the button setups for One-touch or Coded
Speed dialling. (
Q4-6, 4-14)
ON
All transmissions are conducted with ECM if the other party’s fax
supports ECM.
OFF
ECM is turned off.
2.MID PAUSE SET
Set the length of the pause entered between number when you
press the PAUSE button (01 to 15 sec.) (
Q4-3)
02SEC