Canon FAX-L800 - Manual (Page 249)

Canon FAX-L800 User’s Guide ENGLISH
13-17 Chapter 13 Restricting Use of the Fax
Memory Lock Setup Summary
The default settings, shown in bold, remain in effect unless you change them.
1.MEM LOCK PASSWORD 0000 to 9999
This password protects the memory lock settings. You must also
use this password to unlock the memory so you can print
documents stored in the memory. Use the buttons on the numeric
keypad to enter a four-digit password and press SET.
2.REPORT Set the fax to print reports or not. This setting affects only reports
that print automatically, such as Activity Reports for sending and
receiving, and Activity Management Reports.
OUTPUT NO A report is not printed while in the
memory lock mode.
OUTPUT YES A report is printed while the fax is in
the memory lock mode.
3.TIME SETUP Set the times for the fax to enter and leave the memory lock
mode. The time settings are optional. If you do not set the times,
you can use the MEMORY RECEPTION button to turn the
memory lock feature on and off.
OFF Turns off the timer setup. You can
turn the memory lock mode on and
off with the MEMORY
RECEPTION button.
ON Turns on the timer setup. You can
still use the MEMORY
RECEPTION button to turn the
memory lock mode on and off.
START TIME Sets the time for the fax to enter the
memory lock mode.
EVERYDAY
SELECT DAYS Set the time in 24-hour format. Up to
5 starting times can be specified for
every day or each selected day.
END TIME Sets the time for the fax to leave the
memory lock mode.
EVERYDAY
SELECT DAYS Set the time in 24-hour format. Up to
5 starting times can be specified for
every day or each selected day.