Canon FAX-L800 - Manual (Page 180)

Canon FAX-L800 User’s Guide ENGLISH
9-6 Chapter 9 Using a Relay Network
Relay Group Setup Summary (Cont’d)
9.TX START TIME You can set your fax to hold documents and then relay them at a
preset time. If you do not set this item, all documents received for
relay are relayed immediately. If you want to use this feature, press
SET.
Use the buttons on the numeric keypad to enter the time in 24-hour
format. You can set up to 5 times to relay documents within a 24-hour
period every day.
10.RELAY B’CAST This feature switches relay broadcasting for this group on and off
without altering any of the other settings.
ON Your fax unit receives and relay a document set
for relay broadcasting.
OFF Your fax unit will not receive and relay a
document set for relay broadcasting
Changing the Relay Broadcast Settings
Follow this procedure to change the relay broadcast settings.
½ If you want to add to the list of fax units to receive relay broadcasts from
your fax unit, make sure that the numbers you want to add are registered for
One-touch or Coded Speed Dialling.
½ If you want to set your fax unit to confirm the identity of the originator
before it receives a document for relay broadcasting, make sure the telephone
number of the originator’s fax unit is registered for One-touch or Coded
Speed Dialling on your fax unit.
1. Open the RELAY TX GROUP menu. (
Q9-3)
RELAY TX GROUP
1.SETUP FILE
<
< 2. Press the search buttons until you see the display below.
RELAY TX GROUP
2.CHANGE DATA
SET 3. Press SET.
CHANGE DATA
SET RLY TX GROUP# 00