Canon FAX-L800 - Manual (Page 127)

Canon FAX-L800 User’s Guide ENGLISH
6-25 Chapter 6 Sending Documents
-or-
Press DIRECTORY and search for the name to dial a number registered for
subaddress/password sending. (
Q4-31)
4. Press START/SCAN.
TRANSMITTING 0010
SCANNING DOC. P.001
Subaddress/Password Sending with the Operation Panel
Buttons
Note these limitations on entering the subaddress/password with the
SUBADDRESS and PASSWORD buttons on the operation panel:
½ If you frequently need to use a subaddress/password to send a document to
more than one location, register the number, subaddress, and password for a
One-touch or Coded Speed Dialling button so you can use multiple
broadcasting. (
Q6-20)
½ You can not use a One-touch or Coded Speed Dialling button for which TX
TYPE is set for anything other than REGULAR TX. (
Q4-6, 4-14)
½ The password setting is optional but required if the other party has set a
password on the other fax unit.
Follow this procedure to send a document with a subaddress/password entered
with the SUBADDRESS and PASSWORD buttons on the operation panel.
1. Set the document on the fax. (
Q6-3)
Set the document resolution, contrast, and document type. ( Q6-4)
You can also select a sender’s name with the TTI SELECTOR. ( Q6-6)
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PQRS
JKL
TUV
M NO
WXYZ
DEF
2. Dial the telephone number.
Use the buttons on the numeric keypad to enter the telephone number, or
use the speed dialling buttons to dial.
To dial with One-touch Speed dialling, press the One-touch Speed Dialling
button where the number is registered.
To dial with a Coded Speed Dialling, press CODED DIAL and then use the
numeric keypad to enter the three-digit dialling code.