Canon FAX-L800 - Manual (Page 202)

Canon FAX-L800 User’s Guide ENGLISH
11-4 Chapter 11 Setting Up and Using Polling
If you want to receive a document from a fax unit that does not support
ITU-T subaddress/password transactions, press START/SCAN.
-or-
If you want to receive a document from a fax unit that supports ITU-T
transactions, press SET. Then press the SUBADDRESS button.
SUBADDRESS
You must press SUBADDRESS within 5 seconds of pressing SET. If you wait
longer than the timeout interval before pressing SUBADDRESS, the fax will
start scanning the document. The timeout interval can be turned off. (
Q16-11)
An ITU-T subaddress is a number up to 20 digits long which can include
spaces and the symbols
* and #.
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PQRS
JKL
TUV
MNO
WXYZ
DEF SET 5. Use the buttons on the numeric keypad to enter the ITU-T subaddress. Then
press SET.
TEL= 123 4567
01 CANON, INC.
PASSWORD 6. If you must also enter an ITU-T password, press the PASSWORD button.
Otherwise, go on to the next step.
PASSWORD
You must press PASSWORD within 5 seconds of SET. If you wait longer than
the timeout interval before pressing PASSWORD, the fax will start scanning the
document. The timeout interval can be turned off. (
Q16-11)
An ITU-T password is a number up to 20 digits long which can include spaces
and the symbols
* and #.
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PQRS
JKL
TUV
MNO
WXYZ
DEF SET Use the buttons on the numeric keypad to enter the ITU-T password. Then
press SET.
TEL= 123 4567
01 CANON, INC.