Torbal AGC Series Manual - Manual (Page 17)

Instruction Manual - TORBAL AGC Series
7.1.1.2.1. Calibration Adjustment
The Calibration Adjustment function allows the internal calibration mass value to be adjusted
with an external calibration weight that has a traceable class certification. To perform calibration
adjustments follow the steps below:
1. Press the “T” (YES) key when “CALIB” is displayed in the calibration setup menu.
2. The scale will display CAL, indicating that the calibration adjustment mode has been entered.
3. Before calibration adjustment can begin, the scale will perform automatic tare. TARING will be
displayed during auto tare.
4. Once the scale has been tared the current calibration mass setting will be displayed. To change the
calibration mass, press the 0 (NO) key. After making the selection press the “T” (Yes) key to
accept and confirm the setting.
17