Torbal AGC Series Manual - Manual (Page 68)

Instruction Manual - TORBAL AGC Series
7. After setting the sample weight, the command READY will be displayed. Remove the sample and
place the object on the pan. The scale will express the weight of the object as a percentage of the
stored sample.
Note: To change the percent sample press “C” and repeat Steps 1 to 5. If the same sample weight
is used, the scale can be tared without clearing the function and new objects can be weighed.
To exit percent weighing and switch to a different function, press “C” to clear the current
function and then press “Function” to select a different function (follow Steps 1 through 3 from
Chapter 8 on page 50).
68