Torbal AGC Series Manual - Manual (Page 65)

Instruction Manual - TORBAL AGC Series
Semi-Automatic and Manual:
When set to Semi-Automatic or Manual, the weighing result will remain displayed and it must be
manually cleared after the weight is removed from the pan. To clear the weighing result press the
“C” key. After the result has been cleared the scale must be tared. To tare the scale press the “T”
key.
To Clear To Tare
To exit Display Hold and switch to a different function, press “C” to clear the current function
and then press “Function” to select a different function (follow Steps 1 through 3 from Chapter 8
on page 50).
(E) Percent Weighing
Percent weighing is used to express a weight of an object as a percentage of a stored sample
weight. To use percent weighing follow the steps below.
1. Place a container on the pan.
65