Torbal AGC Series Manual - Manual (Page 20)

Instruction Manual - TORBAL AGC Series
3. A dash will appear on the display indicating to enter a desired time interval. The time interval
can be set between 1, 2, 3, 4, 5, and 6 hours (i.e. if set to 3, calibration will be performed once
every 3 hours).
4. To set a calibration time interval press the 0 (NO) key until the desired setting is displayed.
5. When the desired setting is displayed press the “Function” key to accept and save the selection.
The scale will return to the Calibration Menu. To exit the Menu, press the C key.
7.1.1.2.3.Temperature
Internal calibration can be configured to calibrate automatically within a change of
temperature. To set a calibration temperature interval, follow the steps below
20