Torbal AGC Series Manual - Manual (Page 30)

Instruction Manual - TORBAL AGC Series
Note: Larger sample size results in a more accurate average piece weight. Select a sample size greater
than 10 pieces if a large weight variance might exist between the counted pieces.
4. After selecting the sample size, DONE will be displayed indicating that the function has been
configured and it is ready to use. To use the function follow the directions in Chapter 8. To exit the
mode menu use the “C” key.
(C) Check Weighing
1. To enable check weighing press the “T” (YES) key when Check is displayed.
2. Commands CHK On and CHK OFF will be displayed sequentially. To enable check weighing
press the “T” (YES) key when CHK On is displayed. If the function is already enabled and you
wish to disable it, press the “T” (Yes) key when CHK OFF is displayed.
30