Torbal DRX300 Manual - Manual (Page 19)

Instruction Manual - TORBAL DRX 5 Series
4. To configure the “RS232 Port” use the navigation keys to select a desired parameter, press the ENTER key, and
then once again use the navigation keys to make a desired selection.
5. Once the selection is made press the ENTER key to save the setting.
To connect the DRX Scale to a TORBAL RXP-4 printer use the following settings.
Baud Rate: 9600
Bits: 8 Bit
Parity: None
Protocol: Long
Sending Mode: Button + stab.
1.3.Time and Date Adjustment
Note: It is very important to adjust and keep a correct current time and date setting. The scale uses its clock and
calendar setting for functions such as “Average Piece Reminder”, and “Delete by Date Database Maintenance”.
1. Enter the main menu by pressing the MENU key.
19