Torbal DRX300 Manual - Manual (Page 5)

Instruction Manual - TORBAL DRX 5 Series
CHAPTER 3.
KEYS AND DISPLAY INDICATORS
Key Primary Function Secondary Function
I/Ø Power On and Power Off -
Tare – used to tare the weighing pan N/A
0 Zero – used to zero the scale Number “6” key
Enter – used to accept and confirm commands N/A
MENU Menu – used to access the main menu Number “9” key
CLR Clear – used to clear and cancel operation N/A
Navigation Keys – used to navigate through the
menus
N/A
N/A N/A
∑
Sigma – used to update average piece weights / used
to access saved recipe banks
Period “.”
Dara Transfer – used to print data to a printer or
transfer data to a PC via the RS232 communication
port
Number “7” key
▼
Calibration Key – used to initialize automatic internal
calibration
Number “8” key
F1 Weighing Number “1” key
F2 Pill Counting Number “2” key
F3 NDC Verification (independent of pill counting) Number “3” key
F4 Compounding Number “4” key
F5 N/A Number “5” key
Display Indicator Description Explanation
OFF Power Off
The scale is turned OFF and in standby
mode.
AUT AZSM (Automatic Zero Setting Mechanism)
AZSM (Automatic Zero Setting
Mechanism) is active and the scale
maintains a “center of zero” condition
within +/- 5d
NET Net Result
A tare was taken and the scale
subtracted the tare weight from the gross
weight to obtain the net weight.
0 Zero
The scale is maintaining a “center of
zero” condition.
Stability Indicator
The weighing result has stabilized and
an accurate reading may be taken.
APA Advanced Pill Counting
The APA feature is enabled and the
algorithm was activated
pcs Pieces
In pill counting this indicator shows that
the result is a piece count
5