Torbal DRX300 Manual User Manual
Page 33
Instruction Manual - TORBAL DRX 5 Series
13. Once an accurate piece count has been taken, the container and its contents may be removed from the scale. After
the container with the counted pieces has been removed, the scale will signal that the count is finished by
displaying “ ---- COUNT FINISHED.” To begin a new count press the Clear key (CLR).
Important: If too many pieces have been placed into the container, use tweezers, a pharmacy spoon, or a similar
instrument to remove the excess while the container is still on the scale’s pan. If needed, place the container back on the
pan to recheck the count. This may be performed while command “COUNT FINISHED” is displayed, but before
pressing the C key. Once the C key has been pressed, the counting operation will reset and a new counting transaction
may begin.
Note: The steps listed in this chapter must be performed only if the drug is counted for the first time and its sample
weight has not been not stored in the scale’s internal memory.
33