Wire seal – Torbal DRX300 Manual User Manual
Page 44
Advertising
Instruction Manual - TORBAL DRX 5 Series
3.Once the flush sealing screw is in place, the paper seal can be simply placed over the opening as shown in the picture
below.
WARNING: Do not attempt to screw the flush sealing screw all the way in. Stop when the screw is flush with the
casing of the scale.
1.6.Wire Seal
1.To seal the scale with a wire seal, insert the wire into the opening of the calibration screws located at the rear of the
scale.
44
Advertising
This manual is related to the following products: