Chapter 18, Sealing the scale, Paper seal – Torbal DRX300 Manual User Manual
Page 43: Chapter 18.sealing the scale, Chapter 18. sealing the scale
Advertising
Instruction Manual - TORBAL DRX 5 Series
CHAPTER 18.
SEALING THE SCALE
Depending on the laws of the state in which it is used, the scale may have to be sealed by an Weights and
Measures official. The scale can be sealed either with paper or with wire.
To seal the scale, follow the instructions below.
1.5.Paper Seal
1.To seal the scale with a paper seal or a sticker, gently use a flathead screwdriver to remove the calibration wire seal
screw located in the rear of the scale.
2.Once the wire seal screw has been removed and the calibration switch exposed, gently insert the flush sealing screw
provided with the scale in the place of the wire seal screw.
43
Advertising
This manual is related to the following products: