Torbal DRX300 Manual - Manual (Page 31)

Instruction Manual - TORBAL DRX 5 Series
7. Once the weight of the sample stabilizes and the stability indicator appears on the display, press the ENTER key
to confirm and accept the sample weight.
Note: Minimum individual piece weight allowed is 30mg (3e). With a sample size of 10 pieces, the sample weight must
be equal to or greater than 300mg (30e). Attempting to set a sample size of 10 pieces with a total sample weight which is
lower than 300mg (30e) will result in an error.
8. If the Remaining to Fill feature has been enabled, the scale will ask for the number of pills to be counted in the
transaction. Using the scale’s keypad or an external keyboard, key in the number of pills to be counted and press
Enter.
9. The word “FILL” will flash on the display for approximately five seconds. At any time during the Fill command,
add the remaining pieces.
31