Torbal DRX300 Manual - Manual (Page 25)

Instruction Manual - TORBAL DRX 5 Series
CHAPTER 10.
WEIGHING (F1)
1.To begin weighing, press the power button ( ) to turn the scale on.
2. The scale will initialize and calibrate itself, and then automatically enter Weighing Mode. The scale is ready to
begin weighing as soon as the stabilization ( ) and center of zero ( ) indicators appear on the display,
i.e.:
If the scale initialized in a different mode, use the F1 key to enter weighing.
3.When weighing, always place the mass in the middle of the pan. The weighed result may be taken when the
stabilization indicator appears on the display.
25