Garmin 210 - Manual (Page 17)

To continue the tour, let’s mark our simulated present position for reference:
1. Press the O key to capture your present position as a waypoint
The Mark GPS Position window will appear, with a default three-digit way-
point name and symbol. By pressing the ^ key, you can confirm the way-
point with the default name and symbol, but let’s change the name and sym­
bol to something a little more meaningful:
1. Use the 9 keypad to move the field highlight to the 'Wpt'field and press®.
2. Enter the name 'HOME' with the # keypad, pressing ® after each character.
3. After you've entered the last letter, press the OK softkey to confirm the name.
4. The field highlight will move to the waypoint symbol field. Press® to begin
selection of a new waypoint symbol.
5. Use the # keypad to highlight the anchor symbol (at the top left corner of the
window) and press the ® key.
6. The field highlight will move to the comment field, where you may enter a 20-
character comment (the default comment is the date and time of creation).
7. Press ® to begin entry of a comment.
8. Use the# keypad to enter 'TOUR' in the comment field, pressing the® key
after each character.
9. Press the OK softkey to accept your comment.
10. Use the # keypad to highlightthe OK field.
11. Press the ® key to save your new waypoint.
6
PSMAP TOUR
iVIflrfeing a Posithm
\ ^ ......... ii : ji
Hark GPS Position
HptiHOME
n„
FI I n!!
N 23°41.36S'
H077”48.533‘
ilppend To Route_____
iREPT BmnnTT-Bmir
(il[ill3[30
HKiiSdiH
HlH[«][Zl[i]SI
Use cursor to highlight choice, ENT to accept
r X dll I
The GPSMAP system stores up to 500
alphanumeric waypoints, with selectable
graphic icons and a user-defined comment
field, ¡/you mark a navaid position that
appears on a G-chart electronic cartridge,
the default comment will automatically select
the navaid text associated with the marker.