Garmin 210 - Manual (Page 33)

Active
Destination
Field
SOG/COG
or
VMG/TRN
Position
Field
I Routes 111 WoyptslH Cf9~|(| ftux HllSOB/COGll
J
Simulator Speed & Course Softkey —'
Distance &
Bearing
Fields
Course
Deviation
Scale
The GPSMAP Navigation Page provides a large, digital display of navigation
data and graphic steering guidance to an active waypoint. The active destina­
tion waypoint is displayed at the top of the screen, with the ETE (estimated
time enroute) and ETA (estimated time of arrival) based on your present speed
and course at the right side of the field.
The distance and bearing to the destination waypoint, along with your pre­
sent speed and course over ground (SOG and COG) are shown below the des­
tination field. The SOG and COG fields may also be changed to display your
velocity made good and turn value (VMG and TRN).
To display VMG and TRN:
1. Press the ® key. To return to the display to SOG and COG, press ® again.
NMONPUGE SfmiN
Ovmirw J
□BB5 ETE: B0S7:43
ETfl: 10:1G
___ I H 3B-5B.551'1___ I 14-0PR-B4 1
Press EHT to enter data
Whenever your GPSMAP is in simulator mode, a
SOGICOG softkey will appear in the softkey
menu. Use the SOGICOG softkey to set the speed
and course for your simulated trip (see pg. 9-10)
Once you are in the SOGICOG window, you can
also set a simulator position graphically by press­
ing the SET POSN softkey and following the steps
outlined on page 16.
23