Appendix, Secim – Garmin 210 User Manual
Page 72
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECim
APPENDIX
liistdllalion
WARNING!
The GPSMAP system has no user-serviceable
parts, and you should never attempt any
repairs yourself. The unit has been filled with
dry nitrogen to prevent moisture penetration.
Opening the case or loosening any fittings may
expose internal components to moisture and
mil void the manufacturer’s warranty!
Should your unit ever need repair, take it to
an authorized GARMIN service center.
Your GPSMAP system includes the following hardware components:
GPSMAP Unit
Gimbal Mount Bracket
GPS Antenna with 30’ cable (210/220 models only)
Power/Data Cable
If you are missing any of these pieces, see your dealer. To complete the stan
dard installation, you’ll also need the following:
2-amp in-line fuse (may be included with Power/Data cable)
Four 1/4” (6 mm) diameter mounting screws
1” X 14 thread antenna mount and screws
Several optional accessories are also available to provide flexible installation
on any vessel. See your Garmin dealer for more information on these items:
Flush Mount Kit
Antenna Cable Extension
110/220 volt AC adapter
* ^
Reading through the entire installation section before starting your installation will
help you get the most out of your BARMIN navigation system. An improper or poorly
planned installation can affect the GPS receiver's accuracy and the overall perfor
mance of the GPSMAP system.
62