Garmin 210 - Manual (Page 37)

The GPSMAP’s GOTO command lets you select any stored waypoint or tar­
get cursor position as a destination and quickly set a course from your present
position. Once a GOTO has been activated, the Navigation Page will provide
GDI steering guidance to your destination. A GOTO may be activated on the
map display using the cursor, or from any waypoint list.
To activate a GOTO from the map display:
1. Press the® key.
The cursor will appear as an arrow pointer, which lets you point to a
position as your destination using the ARROW KEYPAD. If you want to
GOTO an existing on-screen waypoint, ‘snap to’ the waypoint with the arrow
cursor and press the ® key. If your destination is not an existing waypoint
or is an on-screen navaid, you’ll need to mark the position as a waypoint:
2. Press the ® key to confirm the arrow cursor position as your destination.
3. If you want to accept the new GOTO waypoint with the default name, symbol
and comment press ® to confirm the 'OK' prompt.
4. To enter your own name, symbol or comment highlight the appropriate field
and press ®. After entering your changes, move the field highlight back to the
'OK' prompt and press®.
You can also quickly activate a GOTO to any stored waypoint from any way-
point list (e.g. the waypoint or nearest waypoints list).
To activate a GOTO from a waypoint list:
1. Highlight the desired waypoint with the • keypad.
2. Press ® key to activate the GOTO mode.
3. Press ® to confirm the new GOTO waypoint.
GOTO KEY
Acihaiing GOTOs
SECTION
'EL ON THE BAY
Pr«s EMT to 90 to cursor
193°
____ "m
S.Bkt
155°
N 38°5'1.Z77'
W87B°25.917'
Simulating Hov
Sealt:
I L«t tIMenrestll Hanie~ir
Cursor GOTO
Haypoint 1 ype Distance Bearing
POINT 0 B.4"m Bar
BBS «4 1.5”m 19E°
BB5 o 3.5"m 335°
BB2 w 3.8"m 328°
BB3 o 3.9"m 331°
BB4 o 3.9"m 332°
BBl i 328°
____ 0 "m
__
— _ _____ "m
Use Cursor ond EHT to select a waypoint
List GOTO 27