Garmin 210 - Manual (Page 43)

The INSERT softkey allows you to add a waypoint before the first route
waypoint or after the last route waypoint; or add a new route waypoint to an
existing route leg.
To insert a new starting or ending route waypoint:
1. Use the # keypad to snap to and highlight the first or last route waypoint
2. Press the INSERT softkey.
3. Use the # keypad to move the arrow cursor to the new waypoint position.
4. If the new waypoint position is not an existing waypoint confirm the New Route
Waypoint by highlighting the 'OK' prompt and pressing the ® key.
5. Press the ® key to complete the insertion.
6. Press the EXIT softkey to return to the route modification mode.
To insert a new waypoint in an existing route leg:
1. Use the # keypad to snap to and highlight a route leg.
2. Press the INSERT softkey.
3. Use the # keypad to move the arrow cursor to the new waypoint position.
4. If the new waypoint position is notan existing waypoint confirm the New Route
Waypoint by highlighting the 'OK' prompt and pressing the ® key.
5. Press the ® key to complete the waypoint insertion.
ROUTES
hisi’iliiig Setv Route
Wm]M>inti Graphicall}’
SECTION
1 ^ ^
1
1.011
"IS"*'“—■ •21"
Hjijl B, 0kt
35G^
N Z4"3't.30?
Neai°47.15E'
Simulotins N av
Seale: i;;,
Use cursor and ENT to insert
33