Garmin 210 - Manual (Page 46)

Use cursor to scon waypoint list, EHT <o select
c 1C II Ccmcel~l
36
From the Select Route Waypoint window, you
can also determine the distance and bearing
between the route waypoint shown and any
other waypoint in memory.
To use the reference waypoint Junction:
• Highlight the “Ref Wpt’field
• Press the SCAN softkey
• Use the ARROW KEYPAD to scroll
through and find the desired waypoint
The distance and bearing will now be
displayed below the reference waypoint field.
The Select Route Waypoint window also lets you rename a route waypoint,
or delete a waypoint from system memory (‘active to’ waypoints can’t be deleted).
To rename a route waypoint:
1. Press the RENAME softkey.
2. Use the # keypad to enter the new name.
3. Press the OK softkey to accept the new waypoint name.
To delete a route waypoint from system memory:
1. Press the DELETE softkey.
2. Press the ® key to confirm the delete waypoint warning.
The last two functions of the text review mode are removing and inserting
route waypoints from the route waypoint list.
To remove a route waypoint from the list:
1. Press the REMOVE softkey.
To insert a route waypoint in the list:
1. Use the # keypad to highlight the existing route waypoint position where you
want the new waypoint to appear.
2. Press the INSERT softkey.
3. To insert a waypoint from the main waypoint list, press the SCAN softkey, use
the # keypad to select a waypoint and press the ® key twice.
4. To enter a new waypoint, press the ® key and use the # keypad to enter the
new waypoint name and press the OK softkey.
5. Enter the waypoint position and data and press the OK softkey.