Canon IMAGERUNNER 2230 - Manual (Page 140)

Changing the Zoom Ratio 3-32
3
Speci
a
l F
a
x Fun
c
ti
ons
4
Specify the destination
➞ press (Start).
For more information on specifying the destination, see "Dialing Methods," on p.
2-16.
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display
➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
• To return the ratio to 100%, press [Direct].
• To cancel all settings and return the machine to the Standard mode, press
(Reset).