Canon IMAGERUNNER 2230 - Manual (Page 280)

Communications Settings 6-24
6
System Mana
ger Settin
gs
If [Select Days] is selected, press [Next]
➞ select a day of the week ([Sun] to
[Sat])
➞ select a number ([1] to [5]) ➞ enter the start time using
- (numeric keys)
➞ press [OK].
You can store up to five different start times for each day of the week.
Enter all four digits of the time (including zeros), using 24-hour notation.
If [Off] is selected, the Forward mode will not start automatically at a specified
time. You can manually switch the machine into the Forward mode, using the
RX mode from the Special Features screen. (See "Changing the Reception
Mode," on p. 3-17.)
NOTE
• You can select [Everyday] for the Forward Start Time, and [Select Days] for the
Forward End Time, and vice versa.
• If you make a mistake when entering the time, press (Clear) to clear your entry
➞ enter another four digit number.
• If you do not want to specify the start time, press [Cancel].
• The default setting is 'Off'.
• To disable the Forward Start Time, press [Forward Start Time]
➞ [Off].
Examples: 7:05 a.m.
➞
0705
11:18 p.m.
➞
2318