Canon IMAGERUNNER 2230 - Manual (Page 87)

Sending Methods 2-15
2
Basic Send
and Receiv
e Methods
2
Make sure the machine is ready to send
➞ press [Stamp].
A check mark ( ) appears in the box to the left of [Stamp].
NOTE
To cancel the Stamp mode, press [Stamp] again.
3
Specify the destination
➞ press (Start).
Scanning starts.
A stamp mark ( ) appears on the original.
NOTE
• For instructions on specifying the destination, see "Dialing Methods," on p. 2-16.
• If the stamp is not marked clearly, see Chapter 7, "Routine Maintenance," in the
Reference Guide.