Canon IMAGERUNNER 2230 - Manual (Page 240)

Setting Up Memory Boxes 5-74
5
Customizin
g F
a
x Se
tting
s
5
Press [Register Name].
6
Enter a name for the Relay Memory Box
➞ press [OK].
You can enter up to 24 characters for the Relay Memory Box name.
NOTE
• For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide.
• If you make a mistake, press (Clear) to clear the entire entry
➞ enter the correct
name.
• If you want to cancel entering the memory box name, press [Cancel].