Canon IMAGERUNNER 2230 - Manual (Page 345)

Glossary 9-21
9
App
end
ix
Transfer
You can arrange for all documents received in the main fax machine to be transferred
to another fax machine. For example, you can have your office fax transfer all
incoming documents to your home. You can specify the day of the week and time of
day at which this feature is activated. However, documents received in a Mail Box or
Confidential Mail Box cannot be transferred.
Transfer password
Protects the transfer settings from unauthorized access. You must enter the transfer
password (up to seven digits) to view or change the transfer settings.
Transmission Time
A fax transmission consists of three stages: the machine sending the fax connects
with the machine receiving it, the message is then transmitted, after which the sender
and the receiver exchange signals to confirm the end of transmission. The
transmission time described in this guide is not the total time required for the entire
transmission, but only the time taken for the message to transmit.
TTI
Transmit Terminal Identification. Also called the TX Terminal ID. The TTI is the name
of a person or an organization and the facsimile number of the machine that sends a
document. In addition to the unit name that you register for the machine, you can
create up to 99 sender names that can be selected and used in place of the unit's
name when you send a facsimile.
TX
Abbreviation for "Transmission/Sending."
U
UFR II
Ultra Fast Rendering II. A printing algorithm for realizing high speed monochrome
rendering. UFR II enables processing tasks to be executed and divided appropriately
between the host PC and the printer to greatly reduce overall printing time. The UFR
II printer driver supports only monochrome printers.
Ultra Fine
A resolution mode for sending originals at 16 dots/mm x 15.4 lines/mm (eight times
the standard resolution). If the receiving fax machine does not support this mode, the
original is automatically sent in the Super Fine or Fine mode.