Canon IMAGERUNNER 2230 - Manual (Page 63)

Placing Originals 1-39
1
Introdu
ctio
n to
F
a
x Function
s
• The size of STMT and STMTR originals cannot be detected. After pressing
(Start), follow the instructions on the screen to specify the original size. You can
also manually select the paper size.
Feeder (DADF-N1) (Optional)
You should use the feeder when you want to scan several originals at the same
time. Place the originals into the feeder and press (Start). The machine
automatically feeds the originals to the platen glass and scans them into memory.
Two-sided originals can also be automatically turned over and scanned as
two-sided documents.
You can place the following originals into the feeder's original supply tray:
• Weight:
- 13 to 32 lb bond (50 to 128 g/m 2 )
• Size:
- 11" x 17", LGL, LTR, LTRR, STMT or STMTR
• Tray Capacity:
- 50 sheets (20 lb bond (80 g/m 2 ))
- 10 sheets (13 lb bond (50 g/m 2 ))
IMPORTANT
• Do not place the following types of originals into the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon backed paper or other originals which may not feed smoothly
- Transparencies and other highly transparent originals