Canon IMAGERUNNER 2230 - Manual (Page 88)

Dialing Methods 2-16
2
Basic Send
and Receiv
e Methods
Dialing Methods
This machine provides you with four ways to specify the fax destination:
■ Using the Numeric Keys
You can specify one or more destinations using - (numeric keys).
■ Redialing
You can specify the last destination that was dialed with - (numeric keys) by
pressing [Redial] on the Fax Basic Features screen.
■ Using Coded Speed Dialing
You can specify one or more destinations by pressing [Coded Dialing] on the Fax Basic
Features screen followed by a three digit code.
■ Using the Address Book
Specify the destination by pressing [Address Book] on the Fax Basic Features screen,
and select a destination from the Address Book.
Numeric Keys
You can dial the fax number of one or more recipients using - (numeric keys)
on the control panel.
IMPORTANT
If Restrict New Addresses in System Settings (from the Additional Functions screen) is
set to 'On' when the machine is in the System Management mode, you cannot specify a
destination using
- (numeric keys).
1
Place your originals.
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-34.