Adjusting the alarm and monitor volume, Adjusting the alarm and monitor volume -12, P. 5-12 – Canon IMAGERUNNER 2230 User Manual
Page 178
User Settings
5-12
5
Customizin
g F
a
x Se
tting
s
3
Press [Light] or [Dark] to set the scanning density
➞
press [OK].
The selected mode is set.
NOTE
To cancel this setting, press [Cancel].
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Adjusting the Alarm and Monitor Volume
You can set the volume for the alarm and monitor tones that this machine sounds
during a fax transmission.
NOTE
•
The alarm tone sounds when sending or receiving is canceled.
•
The monitor tone sounds when the machine connects to the recipient's fax machine.
•
The default setting for both the Alarm Volume and Monitor Volume is in the middle (4), on
a scale of 0 to 8.
1
Press
(Additional
Functions)
➞ [Custom Fax Settings] ➞
[User Settings].
If necessary, see the screen shots in steps 1 and 2 of "Registering the Standard
Key," on p. 5-4.