Canon IMAGERUNNER 2230 - Manual (Page 86)

Sending Methods 2-14
2
Basic Send
and Receiv
e Methods
Stamping Originals
The machine can print a stamp (approximately 1/8" (3 mm) in diameter) on the front
side of scanned originals.
IMPORTANT
• The Stamp mode cannot be used with the Document Size (Other Size) mode.
• The Stamp mode cannot be used when sending a fax document in the Direct Sending
mode.
NOTE
The Stamp mode can be set only if the optional Feeder (DADF-N1) is attached.
1
Place your originals into the feeder.
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-34.
Position at which
stamp is applied.
Vertical placement
Position at which
stamp is applied.
ABC
Horizontal placement