Canon IMAGERUNNER 2230 - Manual (Page 300)

Specifying Report Settings 7-10
7
Pr
in
ting Co
mmunica
ti
on Repo
rt
s
RX Report
The RX Report enables you to check whether documents were sent correctly from
the sender's machine and received successfully by this machine. An RX Report
can be printed automatically after documents are received, and you can also set
the machine to print an RX Report only when a reception error occurs.
NOTE
• For an example of an RX Report, see "RX Report," on p. 9-5.
• The default setting is 'Off'.
1
Press (Additional Functions)
➞ [Report Settings] ➞ [Fax]
under <Custom Settings>.
If necessary, see the screen shots in steps 1 and 2 of "TX Report," on p. 7-3.
2
Press [RX Report].
NOTE
If the desired setting is not displayed, press [
▼] or [▲] to scroll the desired setting.