Canon IMAGERUNNER 2230 - Manual (Page 127)

Faxing Two-Sided Originals 3-19
3
Speci
a
l F
a
x Fun
c
ti
ons
Faxing Two-Sided Originals
You can set the machine to automatically turn over two-sided originals that are
placed in the feeder, and scan each side separately.
IMPORTANT
• The 2 1-sided mode is available only if the optional Feeder (DADF-N1) is attached.
• The 2 1-sided mode cannot be used with the Document Size (Other Size or Long
Original) or Direct Sending mode.
• When you are scanning originals with a horizontal (landscape) orientation, such as
LTRR, make sure to place them horizontally into the feeder. If these originals are placed
vertically, the back sides of these originals are scanned upside down.
1
Place your originals into the feeder.
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-34.
2
Press [Special Features]
➞ [2 1-sided].
3
Press [Done].
The selected mode is set, and the display returns to the Fax Basic Features
screen.