Ciprico Rimfire 3880 - Manual (Page 181)

User’s Guide 21020285 D
Chapter 8 Details of Usage
Byte and Word Swapping Page 8 - 7
Data
Swapping
Since the RF3880 does not handle data swapping you may need to provide
software that will do the swapping when you are sharing data between two
different types of processors.
Sharing Tapes
For example, if you are writing tapes with an Intel based machine and only Intel
based machines will be reading them, no data swapping is necessary. However,
if a Motorola machine was to read the tape, special software to reorder the data
structures may be needed.
Dual Initiators
Another case in which data swapping may be needed would be when dual
RF3880’s are used in separate machines but share the same SCSI bus. If both
systems use the same disk media, and each is based on a different processor,
one of the systems may need special software to swap the data.