Sangean DDR-63+ (V1) - Manual (Page 46)

45
DAB Radio
Using DAB mode for the first time
Carefully extend the telescopic aerial.
Press the Standby button to switch on the radio. If the radio has been used before the last
used mode will be selected.
Press the Radio button as needed so that DAB radio mode is selected on the display.
If this is the first time that DAB mode is used a quick scan of the Band III DAB channels will
be carried out. The display will show 'Scanning'. (If the radio has been used before the last
used station will be selected instead.)
During the scanning process, as new stations are detected the station counter will increase
and the stations will be added to the list which is stored in the radio. The bar graph indicates
the progress of the scan.
When scanning is completed the radio will list the stations found (in numeric-alpha order
0....9...A...Z), unless it has previously been tuned to a DAB station. Press the Folder Up or
Down buttons to scroll through the list of available DAB radio stations. Press the Select button
to select the highlighted station. The display may show 'Connecting...' while the radio re-tunes.
Use the Volume buttons to set the sound level as needed.
If the station list is still empty after the scan the display will show 'Service not available'. If no
stations are found it may be necessary to relocate your radio to a position giving better
reception.
.
.
.
.
5.
6.