Sangean DDR-63+ (V1) - Manual (Page 92)

9
Setting up your My EQ profile
If you find the preset equalizer functions not to your liking, you may set up a custom treble and
bass setting as follows:
Follow steps 1-3 on the preceding page in order to enter the Equalizer menu or alternatively
press the EQ button on the remote control.
Press the Folder Up or Down buttons until 'My EQ profile setup' is highlighted on the display.
Press the Select button to enter the adjustment mode.
To adjust the bass level press the Folder Up or Down buttons until 'Bass' is highlighted on the
display. Press the Select button to enter the adjustment mode and press the Folder Up or Down
buttons until the desired level (between -14 and +14) is displayed. The sound will change as
you adjust the level. Press the Select button when you are happy with the bass setting.
To adjust the treble level press the Folder Up or Down buttons until 'Treble' is highlighted on
the display. Press the Select button to enter the adjustment mode and press the Folder Up or
Down buttons until the desired level (between -14 and +14) is displayed. The sound will change
as you adjust the level. Press the Select button when you are happy with the treble setting.
Press the Back button and the display will prompt you to save the changes. If you wish to
save the changes highlight 'YES'. If you do not wish to save the changes highlight 'NO'. Press
the Select button to enter the selection.
To use the 'My EQ' profile press the Folder Up or Down buttons until 'My EQ' is highlighted,
and then press the Select button to make the selection.
.
.
.
.
5.
6.
To quickly cancel the effect of the 'My EQ' profi le press the Folder Up or Down buttons until 'Normal
(Flat)' is highlighted on the display and press the Select button to select. The treble and bass settings
will be remembered for the next time that you wish to use the 'My EQ' setting.