Sangean DDR-63+ (V1) - Manual (Page 79)

78
GB
iPod Docking
Your DDR-63+ radio has an iPod dock facility which allows you to play digital audio files and video
soundtracks held on your iPod directly. The DDR-63+ uses the Universal Dock Connector developed
for use with iPods. Most recent models of iPod are supplied with adaptor inserts which ensure correct
alignment of the iPod with the electrical connector. Earlier models of iPod were not supplied with the
necessary inserts, and so your DDR-63+ is supplied with insert types 1 - 7. Should you require an
insert to use your iPod with the DDR-63+, then please contact an iPod accessories supplier.
Ensure that the radio is in standby. Carefully remove the iPod dock connector cover from the top
of your radio.
Place the iPod docking adaptor (see above) into the iPod docking recess so that it is securely seated.
Carefully place your iPod on the universal iPod dock connector then press the Standby button
to switch on the radio.
To avoid possible damage to either device, do not use your iPod
without the correct adaptor fitted in the dock connector.
To select the iPod mode press the Media button until 'iPod' shows on the display. If it was
previously playing, your iPod will switch on and continue playing from where it was previously
stopped.
.
.
.
.
Note:
The DDR-6+ radio is able to recharge your iPod's internal battery. Recharging does not take
place while your DDR-63+ is using DAB or FM radio. Your iPod will use its backlight settings as
configured. If these need changing, use the iPod's Settings menu.